SHERCO 2013 SE 250i-R User Manual

32/54
Checking the center crankcases:
• Inspect the general condition of the
center crankcases for wear and cracks.
Replace the center crankcase if necessary.
• Inspect the condition of all the bearings.
Replace the bearings if necessary.
• Inspect the condition of the crankshaft
bearings.
Replace the crankshaft bearings if necessary.
• To remove the bearings, install tool
number R464, heat the tool and the bearing.
• Remove the bearing.
The radial play in the roller bearings must
be practically zero.

SHERCO 2013 SE 250i-R Specifications

General

Brand	SHERCO
Model	2013 SE 250i-R
Category	Motorcycle
Language	English