43/54
► Connectcion : Allows you to connect to the vehicle.
► Disconnect : Allows you to disconnect from the vehicle.
► Ecu choice menu : When you connect to the vehicle, the software automatically recognizes
the type of ECU.
Connecting the diagnostic kit wiring
Connect the serial cable RS232 to the serial port of your computer (laptop or desktop).
Connect the power cable to the battery. Red connector on the + battery terminal, black
connector to the – battery terminal.
Connect the male 3-way diagnostic connector to the motorcycle.
The diagnostic connector is located on the right of the steering column of the motorcycle.
Start the program by selecting the desired language.
Turn the motorcycle ignition on.
Connection problem ?
Check that:
-the battery voltage is sufficient (> 12V)
-the serial port of your computer corresponds to that of the software (change the port in the
Communication menu).
Performing diagnostic
The ECU backup memory detects any component defects. With the VDSTS you can view the
current status and history. If there is a problem with your vehicle, the first thing to check is for
any error message in the ECU memory:
►Instrument screen menu
►E/S function errors
To Next Page
Loading...
Need help?
General
