ENGLISH
31
When selecting the SUBWOOFER MODE
• "SW +" mode is effective only when "FRONT" and "CENTER" are set to "L" and "SUB- W" is set to "Y" on the
CONFIGURATION menu. (For details, refer to "SETTING THE SPEAKER" on page 35.)
• While playing the 2 channel source in MATRIX, CHURCH, THEATER, HALL or STADIUM mode, the low
frequency signals can be reproduced from subwoofer regardless of the subwoofer mode setting.
NORM : When the low frequency signals of channels set to "L" are reproduced from those channels only.
In this mode, the low frequency signals that are reproduced from the subwoofer channel is only the low
frequency signals of LFE (from the multi-channel sources that contains LFE (Low Frequency Effects)
channel, also called the ".1" channel) and the channels set to "S".
SW +: When the low frequency signals of channels set to "L" are reproduced simultaneously from those
channels and the subwoofer channel.
In this mode, the low frequency range expands more uniformly through the room, but depending on the size and
shape of the room, interference may result in a decrease of the actual volume of the low frequency range.
SETTING THE SYSTEM
• AMP ASSIGN : To assign the power amplifier to the surround back channels or the ROOM 2 channels.
• SW M (SUBWOOFER MODE) : To select the desired subwoofer mode.
• TONE : To adjust the tone (bass and treble) as desired.
• RETURN : To return to the previous menu.
1. Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired item.
2. Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to set the selected item as desired.
• The SURROUND BACK / ROOM 2 channels' power amplifier can drive the surround back speakers or the
ROOM 2 speakers. Depending on how to use the speakers, you should assign the power amplifier correctly.
(For details, refer to "CONNECTING SPEAKERS" on page 8 and "CONNECTING ROOM 2 OUT JACKS OR
ROOM 2 SPEAKER TERMINALS" on page 9.)
SB(SURROUND BACK): To drive the surround back speakers when connecting the SURROUND BACK/ROOM
2 channels to them.
R2(ROOM 2): To drive the ROOM 2 speakers when connecting the SURROUND BACK/ROOM 2 channels to them.
When selecting the AMP ASSIGN
↕
↕
RD7405(A)100225_RD7405(A).qxp 2010-03-09 오전 9:47 페이지 31