• You should assign the connected DIGITAL INs to the desired of CD and VIDEO 1 ~ VIDEO 2.
(For details, refer to "CONNECTING DIGITAL INS" on page 7.)
When selecting the DIGITAL IN
33
3. Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the connected DIGITAL IN.
2. Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the “DIN”.
ENGLISH
SETTING THE INPUT
• Input source name(RENAME MODE) : To give a new name to the input source.
• DIN (DIGITAL IN) : To assign the connected DIGITAL INs to the desired input.
• RETURN : To return to the previous menu.
1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then press the ENTER button.
• Then the name of the selected input source is
displayed.
• You can select the desired of OPT (optical), COAX 1
(coaxial 1), COAX 2 (coaxial 2) and ANL (analog).
■Note :
• In such a case that a DIGITAL IN is assigned to
two input sources or more, when these input
sources are selected, the digital audio signals can
be heard from the same DIGITAL IN.
RD7405(A)100225_RD7405(A).qxp 2010-03-09 오전 9:47 페이지 33
To Next Page
Loading...
Need help?
General
