34
ENGLISH
• You can give a new name to the input source.
• Up to 7 characters can be entered for each name.
When selecting the RENAME MODE
5. Repeat the above steps 3 and 4 to enter the
desired characters on the rest of the digits.
6. To confirm your entry, press the ENTER button.
3. Press the CURSOR LEFT(◀)/RIGHT(▶)
buttons to select the desired digit.
4. Press the CURSOR UP(▲)/DOWN(▼) buttons
to enter the desired character on the selected
digit.
2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the input source name(RENAME MODE), then
press the ENTER button.
• The name is stored in the memory.
• Then the cursor moves to the desired digit.
Example) When selecting the VIDEO 1 as an
input source
• You can enter the desired among blank, A ~ Z, 0 ~
9, (, ), , +, , , —, ., /.
■To resume its factory input source name
• Enter a blank on each digit.
RD7405(A)100225_RD7405(A).qxp 2010-03-09 오전 9:47 페이지 34
To Next Page
Loading...
Need help?
General
