8
Safety PrecautionsSafety Precautions
Precautions Related to Inspections/Maintenance
CAUTION
Prohibitions
The design standard period of usage for this product is ten years. Using
the product for more than the design standard period may result in it being
impossible to maintain performance or malfunctions, etc.
• A fee is charged for safety inspections. Direct all requests to our sales offices, dealers or the service agencies specified by
the company.
• The design standard period is the standard period during which the product can be used safely without malfunctions, and it
does not represent the valid period of product warranty.
• See [Chapter 11. Maintenance] for details on daily maintenance inspections and replacement parts.
Make sure the back plate is not unintentionally removed other than when
replacing the ionizer (excluding the W-AD Series)
Failure to observe this may result in injury and malfunctions. It is not necessary to remove the back plate for normal inspections
and maintenance work. Contact the service representatives specified by Shimadzu and request repairs that require the back
plate to be removed.
Instructions
Unplug the power cord from the AC adapter during inspections, maintenance
and when replacing parts.
Failure to observe this may result in accidents caused by electric shocks or short-circuits.
Instructions
Always use the parts specified in the instruction manual when replacing parts.
The use of non-specified parts may result in them becoming damaged and unusable.
Instructions
Could cause electric shocks
Unplug the AC cord from the power outlet when carrying out maintenance.
Instructions
Using the ionizer with the discharge electrode bent or missing will reduce the
neutralization performance
The discharge electrode must be replaced if it is bent or missing.
Contact a Shimadzu Corporation sales location or distributor for details.
Measures to be Observed during Emergencies
CAUTION
Instructions
If you detect anything abnormal (e.g. a burning smell), immediately disconnect
the AC adapter from the power outlet.
Continuing to use the balance with an abnormality could lead to fire or an electric shock.
Measures to be Observed during Power Outages
CAUTION
Instructions
After a power outage, turn the power back ON.
When a power outage occurs, the power is shut off automatically. Therefore, begin operation from “Turning on the Power”
(^ [Turning on the Power] (P.26) again.
To Next Page
Loading...
Need help?
General
