Shimadzu AP124X - Changing User Passwords

77
1
3
5
2
4
6
7
8
12
14
13
9
10
11
66 SettingsSettings

Changing User Passwords
Each user must set their own user ID password (a password is required when logging in). The default
password when the balance is shipped from the factory is [0000].
It is not necessary to enter a password during log-in if [0000] is set as the password.
Once the password has been set at anything other than [0000], this password must be entered during
log-in. Observe the following procedure to log-in with personal user IDs.
1. Call out the user settings.
(1) Press [ MENU] with the weight displayed, and then press [ LEFT].
(2) Select [ System settings], and then press [ OK].
(3) Select [User Settings], and then press [ OK].
2. Select the user that is to be set up.
Select the personal user ID (or user name),
and then press [ OK].
3. Change the password.
(1) Select [Password], and then press [ OK].
(2) Enter the current password, and then press [ OK].
The default password when the balance is shipped
from the factory is [0000].
(3) Enter the new password, and then press [ OK].
The illustration on the left shows an example of the
new password as [1234].
^ [Entering Numerals and Characters] (P.43)
4. Return to the weight display.
Press [ POWER].