Shimadzu AP124X - Measuring Formulas (Formulation mode)

108
77 ApplicationsApplications
2. Set element number output at ON or OFF
(1) Select [Total Weight Output], and then press
[ OK].
(2) Select [on] or [off], and then press [ OK].
3. Return to the Add-on mode’s weight measurement mode
Press [ POWER].
Total Weight

Measuring Formulas (Formulation mode)
 Measuring Formulas (Formulation)
This function is useful when formulating multiple samples. It is used with a printer or personal
computer connected.
1. Set the Formulation mode
(1) Press [ MENU] while in the weight
measurement mode, and then press [ LEFT].
(2) Select [ Select Mode], and then press [ OK].
(3) Select [ Formulation mode], and then press
[ OK].
Set element number output and total weight
output.
^ [Element Number Output (Formulation)] (P.10 9 )
^ [Total Weight Output (Formulation)] (P.110 )
(4) Place the container on the pan, and then press
[ 0/T].
Taring will be performed.
(5) Press [ OK].
The Formulation mode will enter the measurement ready status.