6
Safety PrecautionsSafety Precautions
Precautions Related to Installation Work
CAUTION
Prohibitions
Do not connect anything other than peripheral devices specified by Shimadzu
to the balance’s connector
If you do, the balance may stop working normally.
In order to avoid trouble, always connect peripheral devices in accordance with the directions in this manual.
Instructions
Use the correct power supply and voltage with the AC adapter supplied
Using the balance with an incorrect power supply or voltage may result in the outbreak of fire or malfunctions. Note also that if the power supply
or voltage is unstable or if the power supply capacity is insufficient, it will not be possible to obtain satisfactory performance from the balance.
Instructions
Install measures to prevent the balance from toppling over in the event of
earthquakes, etc
If the balance topples over as a direct result of vibrations, it may result in injury.
Plug the AC adapter into an easily accessible power outlet
During emergencies, it is necessary to unplug the AC adaptor from the power outlet.
Instructions
Beware of the gaps between equipment during installation
Failure to observe this may result in fingers getting caught, leading to injury.
Place fingers on the indentations on the sides of the unit and grip it firmly with both hands during installation.
Instructions
Only use the ionizer AC cord with a grounding outlet/receptacle
Failure to do so will decrease neutralization characteristics (neutralization time, ion balance).
Keep the ionizer far away from any other products which may suffer from
malfunctions if near the ionizer
The ionizer is protected against electromagnetic wave interference. However, other devices which are not protected or not
sufficiently protected against electromagnetic waves may suffer from malfunctions if placed near the ionizer or AC adapter cord.
Precautions Related to Work/Operations
CAUTION
Prohibitions
Do not operate the ionizer when measuring items that are explosive or inflammable
Failure to observe this may result in ignition and the outbreak of fire.
Instructions
Use the correct weighing units
Using incorrect weighing units can lead to accidents as a result of weighing errors. Check that the weighing units are correct before starting weighing.
Instructions
Treat the balance with care and respect
The balance is a precision instrument. Subjecting it to impact may result in malfunctions. When moving the balance, remove the
pan, the pan supporter the shield plate, fix the glass draft shield, the Internal windbreak plate, the Power pack, the Stage, the
Shield case and the Multi-stand, etc in place, and grasp it firmly with both hands when carrying it. If the balance is to be stored for
long periods of time, place it in the packaging box which was used for delivery and store it in a safe location with few temperature
fluctuations.
To Next Page
Loading...
Need help?
General
