Shimano Steps E6100 Series - Quick Guide

8
Quick guide
SHIMANO STEPS E6100 is compatible with the following types of components in addition to those listed here.
• Cycle computer SC-E7000
• Switch unit SW-E7000
• Frame built-in battery BT-E8020
For details on display and operation, refer to "Operation."
For details on the battery, refer to "Preparation."
1. Charge the battery.
It is possible to charge the battery even while it is mounted on the bicycle.
For details, see “Charging the battery while installed on the bicycle.”
< Down-tube mount type battery >
3
2
1
Light On
Example : BT-E8010
< Rear carrier mount type battery >
1
3
2
Light On
BT-E6000 / BT-E6001
< Integrated battery >
Light On
BT-E8020