Shimano Steps E6100 Series - [Light] Light ON;OFF (SC-E7000 Only)

50
 [Light] Light ON/OFF (SC-E7000 only)
Configure the battery-powered light setting.
1. Enter the [Light] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Light], then
press Assist-A or the function button.
2. Press Assist-X or Assist-Y to select the required setting.
Assist
Configurable items Details
[ON] Keep light always on
[OFF] Keep light always off
3. Press Assist-A or the function button to confirm the
setting.
* After confirmation, the screen will automatically
return to the menu list screen.
Function button
Assist