Shimano Steps E6100 Series - Setting Menu; Launching (SC-E6100)

40
Setting menu
 Launching (SC-E6100)
1. Stop your bicycle.
2. Perform the following to switch to the setting menu.
• Ensure that [DST] is not being displayed on the
screen, and then hold Assist-A or the function
button until the screen switches to the setting
menu.
• Hold down Assist-X and Assist-Y together until the
screen switches to the setting menu.
Assist
Function button
< Basic screen > < Setting menu screen >
3. Select the menu item.
(1) Press Assist-X or Assist-Y to move the cursor on
setting menu.
(2) Press Assist-A. If using SW-E7000, press the
Function button.
The display changes to the selected menu item.
Assist
Function button
[Clear]
[Unit]
[Clock]
[Start mode]
[Backlight]
[Brightness]
[Beep]
[Exit]
[Language]
[RD protection reset]
[Adjust]
[Shifting advice]
[Font color]
[Shift timing]
[Display speed]