Shimano Steps E6100 Series - [Backlight] Backlight Setting (SC-E6100 Only)

48
 [Backlight] Backlight setting (SC-E6100 only)
Configure the display backlight.
1. Enter the [Backlight] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Backlight], then
press Assist-A or the function button.
2. Press Assist-X or Assist-Y to move the cursor to the
item you want to configure.
Assist
Configurable items Details
[ON] Always turned on
[OFF] Always turned off
[MANUAL]
Turns on and off in
conjunction with the
battery-powered light
3. Press Assist-A or the function button to confirm the
setting.
* The screen will automatically return to the setting
menu screen.
Assist
Function button