Shimano Steps E6100 Series - [Display Speed] Adjusting the Display Speed; [Exit] Close Setting Menu Screen

58
 [Display speed] Adjusting the display speed
Adjusts the displayed speed when there is a difference between the speed displayed on the cycle computer and other
devices.
If the display on the cycle computer is adjusted, the actual speed may be higher than the displayed speed. Keep this in
mind if riding in an area with a speed limit.
1. Enter the [Display speed] menu.
(1) Launch the setting menu.
(2) Press Assist-X or Assist-Y to select [Display speed],
then press Function button.
If using SW-E6010, control is also possible with
Assist-A.
2. Press Assist-X or Assist-Y to adjust the number.
• Press Assist-X to increase the number. The number
displayed for the speed increases.
• Press Assist-Y to decrease the number. The number
displayed for the speed decreases.
Assist
< SC-E6100 >
< SC-E7000 >
3. Press Assist-A or the function button to confirm the
setting.
* The screen will automatically return to the setting
menu screen.
Assist
Function button
 [Exit] Close setting menu screen
Return to the main screen.
1. Launch the setting menu.
2. Press Assist-X or Assist-Y to select [Exit], then press Assist-A or the function button.
* The screen will automatically return to the setting menu screen.