30
Turning the light ON / OFF
•
If your bicycle has the lights connected to drive unit, the lights can operate from the cycle computer or junction [A].
•
The light turns off in conjunction with the battery power. When the battery power is off, the light is off.
•
If using SC-E7000, the light is operated from the setting menu. For details, refer to "[Light] Light ON/OFF (SC-E7000 only)."
SC-E6100
1.
Press the light button.
•
Lights are turned on.
•
To turning off the lights, push the button again.
*
If no light is connected to the drive unit, setting
[Backlight] in the cycle computer setting menu to
[MANUAL] will allow you to turn the backlight ON/
OFF (only) using the light button on the cycle
computer.
When the light is
turned on
When the light is
turned off
Light button
EW-EN100
You cannot turn the light off while riding the bicycle.
1.
Press and hold (about 2 seconds) the button until the
lights turn ON/OFF.
The LED1 blinks green.
Button
LED1
To Next Page
Loading...
