1. Preface
This instruction manual is intended for those who will be involved in wiring, installation, operation and routine
maintenance of the MAC6 and MAP6.
This manual describes the care, installation, wiring, function, and proper procedures regarding the operation of
MAC6 and MAP6.
Keep this manual on hand while using this device. Please follow the provided guidance.
2. Matters regarding safety
This mark indicates hazardous conditions that could cause damage to equipment and/or facilities. Exercise
extreme caution as indicated.
WARNING
This mark indicates hazardous conditions that could cause injury or death of personnel.
Exercise extreme caution as indicated.
CAUTION
This mark indicates hazardous conditions that could cause damage to equipment and/or facilities.
Exercise extreme caution as indicated.
"NOTE"
This mark indicates additional instructions and/or notes.
WARNING
MAP6 is designed for controlling temperature, humidity, and other physical subjects in general industrial facilities.
It must not be used in any way that may adversely affect safety, health, or working conditions.
CAUTION
To avoid damage to the connected equipment, facilities or the product itself due to a fault of this instrument, safety
countermeasures must be taken before usage, such as proper installation of the fuse and the overheating
protection device. No warranty, expressed or implied, is valid in the case of usage without having implemented
proper safety countermeasures.
To Next Page
Loading...
Need help?
General
