Zone 3 SP (set point) setting screen
Initial value : 0.0
Setting range : within measuring range ,scaling range and limit setting.
Change PID No, at set point.
No display at Zone PID OFF.
Being initialized when measuring range and scaling changed
Zone 4 SP (set point) setting screen
Initial value : 0.0
Setting range : within measuring range ,scaling range and limit setting.
Change PID No, at set point.
No display at Zone PID OFF.
Being initialized when measuring range and scaling changed
Zone hysteresis setting screen
Initial value : 2.0
Setting range : 0～9999 digits
Mode 5 lead screen
To Next Page
Loading...
