VM-7 System Manual
Chapter 2 Description of the System
14
<Absolute Vibration Monitor Module (VM-702)>
The Vibration Monitor Module is a dedicated monitor that monitors the relative/absolute vibration
level of the rotary machine shafts, or relative vibration and seismic vibration simultaneously.
This module is compatible with up to 2 input systems (relative vibration: 2 channels, seismic
vibration: 2 channels).
Also, this module provide the recorder output corresponding to input signals and contact output, to
outside equipment via the rear panel of the instrument rack.
No. Name Function
①
1ch OK indicator
When 1ch is normal: Lights (in green).
When 1ch warning is activated: Flashes.
②
2ch OK indicator
When 2ch is normal: Lights (in green).
When 2ch warning is activated: Flashes.
③
3ch OK indicator
When 3ch is normal: Lights (in green).
When 3ch warning is activated: Flashes.
④
4ch OK indicator
When 4ch is normal: Lights (in green).
When 4ch warning is activated: Flashes.
⑤
1ch monitor output
connector
Outputs 1ch input signal via the buffer amplifier.
To Next Page
Loading...
Need help?
General