ShopBot PRSalpha - PRS Quick-Start Process Flow

SBG 00185 Copyright 2015 6
Quick-Start Guide for PRSalpha and PRSstandard tools
PRS Quick-Start Process Flow
Load Soware
and Drivers (p. 8)
Connect ShopBot to
Computer (p. 9)
Load Sengs File
(p. 9)
Test Router/
Spindle (p. 13)
Set RPM Control
(p. 16)
Zero Z Axis (p. 14)
Zero X and Y Axes
(p. 15)
Run the Cut (p. 20)
Warm Up the
Spindle (p. 19)