ShopBot PRSalpha - Connect Shopbot to Computer; Load Settings File

SBG 00185 Copyright 2015 9
Quick-Start Guide for PRSalpha and PRSstandard tools
When installaon is complete, three new icons appear on the screen: ShopBot 3, ShopBot Editor, and
VCarve Pro ShopBot Edion.
Connect ShopBot to computer
Connect USB cable from ShopBot control box to computer. Connect the RPM controller USB from vari-
able frequency drive (VFD) unit into another USB port on the computer.
Load sengs le
When prompted to load a default sengs le for the rst me, the following screen should appear: