ShopBot PRSalpha Assembly Manual

ShopBot PRS Assembly Manual Page -1
ShopBot PRS: Assembly Manual
These assembly instructions apply to both PRSalpha and PRSstandard models of ShopBot
CNC’s. Note that there are different sections for connecting each type of tool to the control
box. Make sure that you are using the correct connection section for your ‘alpha’ or
‘standard’ PRS model.
The boxes are very heavy! Several components are heavy! Make sure you have
help or proper handling equipment when moving or positioning boxes or parts.
PRSAssembly080922.doc Copyright 2007,2008 ShopBot Tools, Inc

ShopBot PRSalpha Specifications

General

Software	ShopBot Control Software
Communication Interface	USB
Control System Type	PC-based
Motor Type	Servo
Maximum Feed Rate	600 inches per minute
Repeatability	±0.001 inches
Axis Configuration	3-axis (X, Y, Z)
Spindle Control	Variable speed
Input Voltage	220VAC (depending on configuration)
Emergency Stop	Yes
Safety Features	Emergency stop