27
Changing Automatic Off Hook Preference
ShoreTel users who frequently use a headset may want to use the Automatic
Off Hook Preference feature to select which audio path is automatically
activated when placing or receiving calls. You can control the call activity with
ShoreWare Call Manager.
To configure Automatic Off-Hook Preference, follow the procedure below:
Step 1 Press the Options button , followed by your password
and then .
Step 2 Scroll to Auto Off-Hook and press the Edit soft key.
Step 3 Scroll to the desired Auto Off-Hook mode. You can choose to
route calls to 1. Speaker, or to one of three types of headsets:
2. Headset, 3. Wireless Headset, or 4. Bluetooth.
Step 4 Highlight the desired option and press the OK soft key.
Note that if you select 4. Bluetooth, you must also pair the
headset with your IP phone before you can use the headset.
See “Pairing with a Bluetooth Wireless Headset” on page 33.
Step 5 Press the Done soft key.
Details:
• If Bluetooth is selected but no Bluetooth headset has been paired, then
audio will be routed to the speakerphone.
• If Headset is selected and a Bluetooth headset has been paired and is
within range, then audio will be routed to the Bluetooth headset.
Options
153
OK Cancel
*1. Speaker
Auto Off-Hook
3. Wireless Headse
2. Headset
4. Bluetooth
Asterisk
indicates
that this is
the current
mode.
To Next Page
Loading...
