Shure Incorporated
10/42
◦
◦
◦
◦
◦
◦
◦
•
•
⑧ Balanced XLR Audio Output (one per channel)
Transformer Balanced
Connect to a mic or line level input.
⑨ Mic/Line Switch and Ground Lift Switch (one per channel)
Mic/Line: Applies a 30 dB pad in mic position.
Ground Lift: Lifts the ground from pin 1 of the XLR connector and the sleeve of the ¼" Audio Output
⑩ ¼" Audio Output (one per channel)
Transformer Balanced
⑪ Coaxial inputs from Antenna A and Antenna B
RF Connection for Antenna A and Antenna B.
⑫ RF Cascade Connectors C and D
Passes the RF signal from Antenna A and Antenna B to one additional receiver.
⑬ Antenna Bias Indicator LED
Green: Antenna bias enabled
Red: Antenna fault
Off: Antenna bias disabled
Menus and Configuration
The receiver uses a two-tier menu structure to support multiple channels in a single rack space:
Device Configuration Menu: Items in this menu affect the overall performance of the receiver and apply to all channels
globally
Channel Configuration Menus: Each channel has its own menu allowing for independent channel configuration
To Next Page
Loading...
