Shure AD4D - Australia Warning for Wireless; AD4 D Axient Digital Two-Channel Wireless Receiver; Features; Audio

Shure Incorporated
5/42
•
•
•
•
•
•
•
•
•
•
◦
◦
•
•
•
•
•
•
•
•
•
•
Australia Warning for Wireless
WARNING:This device operates under an ACMA class licence and must comply with all the conditions of that licence including
operating frequencies.
AD4D Axient Digital Two-Channel Wireless Receiver
The AD4D Axient Digital two-channel wireless receiver sets a new standard in transparent digital audio and maximum spectral
efficiency. Groundbreaking performance features include wide tuning, low latency, and high density (HD) mode, ensuring solid
performance in the most challenging RF environments. Networked control, AES3, AES67, and Dante output, and signal routing
options bring a new level of management and flexibility to your entire workflow. Compatible with all Axient Digital transmitters.
Features
Audio
60 dB of gain adjustment offers compatibility with a wide range of input sources
Dante networking for quick and easy channel management
Dante Browse feature for headphone monitoring of all Dante channels, including third party components
AES 256 encryption to protect audio channels
Automaticlimiterfunctionprotectsagainstsignalclipping,allowingforhighergainsettingsandpreventingunexpectedsig
nal peaks
Front panel connection for headphones with adjustable volume
I/O
2 transformer-balanced XLR outputs
AES3 Digital output
2 transformer-balanced 1/4'' outputs
2 Dante-enabled Ethernet ports, 2 network control Ethernet ports with PoE
Split-Redundant mode: 2 ports of Ethernet, 2 ports of Dante
Switched mode: 4 ports of Ethernet, 4 ports of Dante
Note: The receiver can only power 1 PoE device at a time.
Locking AC power connection
AC power cascade to additional components
Optional DC module available to support redundant power
RF
True digital diversity reception per channel
Up to 210 MHz of tuning range
Frequency diversity with selection (bodypack) or combining (handheld)
Channel Quality meter displays signal-to-noise ratio of RF signal
Antenna cascade for 1 additional receiver
Preprogrammed group and channel maps with options for custom groups
Search for open frequencies via receiver using group and channel scan
™