Shure AD4D - Network Control; Included Components; Mounting Instructions

Shure Incorporated
6/42
•
•
•
•
•
•
•
Perform full bandwidth scan for frequency coordination via Wireless Workbench
Register up to 8 transmitters to one receiver channel
High Density transmission mode enables up to 47 active transmitters in one 6 MHz TV channel (up to 63 in one 8 MHz TV
channel)
Network Control
Wireless Workbench control software
ShurePlus Channels mobile device control
Console integration
Control systems support
Included Components
The following components are included with the receiver:
Hardware Kit 90XN1371
Bulkhead Adapter, BNC 95A8994
1/2 Wave Wideband Antenna (2) Varies by region
BNC-BNC Coaxial RF Cable for Bulkhead Mounting (short) 95B9023
BNC-BNC Coaxial RF Cable for Bulkhead Mounting (long) 95C9023
Coaxial RF Cascade Cable 95N2035
AC Power Cable, VLock Varies by region
AC Power Jumper Cable Varies by region
Ethernet Cable 3 ft. 95A33402
Ethernet Jumper Cable 95B33402
Mounting Instructions
This component is designed to fit into an audio rack.
Warning: To prevent injury this apparatus must be securely attached to the rack.
™
™