Shure AD4D - Power Requirements; Thermal Power Dissipation; DC Power Requirements; Network Interface

Shure Incorporated
39/42
Power Requirements
100to240VAC,5060Hz,0.55Amax.
Thermal Power Dissipation
Maximum 23W(78BTU/hr)
Idle 15W(51BTU/hr)
DC Power Requirements
10.9to14.8VDC,3.3Amax.
Network Interface
10/100 Mbps, 1Gbps, Dante Digital Audio
Network Addressing Capability
DHCP or Manual IP address
Maximum Cable Length
100m(328ft)
Cascade Output
Connector Type
BNC
Note: For connection of one additional receiver in the same band
Configuration
Unbalanced, passive
Impedance
50Ω
Insertion Loss
0dB,typical
RF Input
Spurious Rejection
>80dB,typical
Connector Type
BNC
Impedance
50Ω
Bias Voltage
12to13.5VDC,150mAmaximum,perantenna