Shure AD4D - System Gain; Networking; Networking Receivers; Network Control Software

Shure Incorporated
27/42
1.
2.
3.
4.
System Gain
The System Gain feature allows you to view and calculate all gain stages in the signal chain, including input pads, offsets, and
receiver gain. Audio output levels are updated in real time as gain adjustments are made.
From a selected Channel menu: Audio > System Gain
The display shows the pads and the offsets for transmitters and the receiver gain setting.
Use the control wheel to adjust the receiver gain in real time while monitoring the net output levels at the ¼" (6.3 mm)
output and the XLR output.
Press EXIT when finished.
Networking
Networking Receivers
The receiver features a 4-port network interface. Dante technology provides an integrated solution to distribute digital audio.
Dante uses standard IP over Ethernet and safely coexists on the same network as IT and control data. Selectable networking
modes route port signals for flexible network set up.
Network Control Software
ReceiverscanbecontrolledbyShureControl(WirelessWorkbench)forremotemanagementandmonitoring.TheDanteCon
trollermanagesdigitalaudiorouting.SignalsforAMXandCrestroncontrollersarecarriedonthesamenetworkasShureCon
trol.
Shure Control
Wireless Workbench (WWB) software provides comprehensive control for wireless audio systems. Wireless Workbench
enables remote adjustments to networked receivers for real-time changes to gain, frequency, RF power, and control locks.
A familiar channel strip interface displays audio meters, transmitter parameters, frequency settings, and network status.
Dante
The Dante Controller is a free software program created by Audinate toconfigureandmanagenetworksofDanteen
ableddevices.UsetheControllertocreateaudioroutesbetweennetworkedcomponentsandtomonitorthestatusofon
line devices.
™