Shure Incorporated
32/42
1.
2.
3.
1.
2.
3.
1.
2.
3.
•
•
•
1.
2.
3.
Operation
Assigning a Device ID
Assigning custom names or IDs helps with monitoring and organizing when the receiver is part of a large system.
From the Device Configuration menu: Device ID
Press and rotate the control wheel to edit the ID.
Press ENTER to save.
Assigning a Channel Name
Assigning unique names to each channel helps with identification and organization when the receiver is part of a large system.
Select a channel, and then navigate to Channel Name.
Press the control wheel to enable editing, and then turn and press the wheel to edit.
When finished, press ENTER to save.
Locking and Unlocking the Controls
Use the locking feature to prevent accidental or unauthorized changes to controls and settings. The front panel and power
switch can be independently locked or unlocked.
From the Device Configuration menu: Locks
Use the control wheel to change the lock status for the front panel controls or the power switch.
Press ENTER to save.
Display Screen Options
The receiver offers the following display options:
Brightness: Low, Medium, High, Auto
Invert: White text on black or black text on white
Display Sleep: Offers options to turn off display and front panel illumination after 10, 30, or 60 seconds
Tip: Press any front panel control to interrupt Display Sleep.
From the Device Configuration menu: Display
Use the control wheel to edit the settings for Brightness, Invert, or Sleep Display.
Press ENTER to save.
To Next Page
Loading...
