Shure AD4D - Device Configuration Menu and Parameters; Device Configuration Menu Screen

Shure Incorporated
12/42
Icon Meaning
NetworkconnectionpresenttootherShuredevicesorWire
less Workbench
Power switch locked
Front panel controls locked
Indicates that a transmitter is linked to the receiver channel
Indicates ShowLink control active between the receiver and
the linked transmitter
Indicates the controls of a linked transmitter are locked.
Indicates that the linked transmitter's RF signal is on
Indicates an alert or warning
Combining Frequency Diversity enabled
Selection Frequency Diversity enabled
Encryption enabled
Access control enabled
Power source AC, DC power not available
Power source AC, DC power available
Power source DC
Device Configuration Menu and Parameters
Use the following menu items and parameter settings to configure the receiver at the device level.
Tip: Use the ENTER button to save changes or press EXIT to cancel without saving.
Device Configuration Menu Screen
From the home screen, press the control wheel to access the Device Configuration menu.