Shure Advance MXA310 - Maximum SPL Rating; Signal-To-Noise Ratio; Built-in Digital Signal Processing; Networking Cable Requirements

Shure Incorporated
50/55
Maximum SPL
1 kHz at 1% THD, -15 dB Gain Setting
115.2 dB SPL
Signal-To-Noise Ratio
Ref. 94 dB SPL at 1 kHz, -15 dB Gain Setting
Cardioid 75 dB
Toroid 67 dB
Latency
Not including Dante latency
<1 ms
Self Noise
-15 dB Gain Setting
Cardioid 19.2 dB SPL-A
Toroid 26.8 dB SPL-A
Dynamic Range
-15 dB Gain Setting
Cardioid 96 dB
Toroid 90 dB SPL
Built-in Digital Signal Processing
Per Channel Equalizer (4-band Parametric) , Mute, Gain (140 dB range)
System Automatic mixing, Low-Cut Filter (-12 dB/octave @150 Hz)
Networking
Cable Requirements
Cat 5e or higher (shielded cable recommended)
Frequency Response
Frequency response measured from a distance of 2 feet (61 cm).