Shure Incorporated
37/87
Channels: Adjust and monitor channel levels, mute channels or channel groups, configure automix settings, and
adjust equalizer settings.
Settings: Control network IP settings, device name, passwords, languages, firmware identification, and device re
set.
If you’re using Shure Designer software to configure your system, please check the Designer help section
for more about this topic.
Software Workflow Basics
Think of each lobe as an individual microphone. If there were 8 microphones on the table, each one could be
physically moved according to seating arrangements, and would be plugged into a mixer with independent gain
and channel controls. With the Microflex Advance Ceiling Array Microphone, the web application delivers control
over the physical coverage and audio channel settings, with user presets to quickly switch between configurations.
Each lobe is moved according to seating arrangements, with 3 width settings to change the size of the coverage
area. Independent mixer channels control the level and audio properties for each lobe.
To Next Page
Loading...
