SI Analytics TITRONIC 300 - Setting the Language of the Country

61
2.4 Setting the Language of the Country
The ex-factory default language setting is English. When the piston burette is switched on, the main menu will
appear once the boot sequence is completed:
Fig. 4
Using <MODE>, followed by <System settings> you navigate to the system settings. The very first menu is to be
used for setting the language of the country:
Fig. 5
The first menu is the language settings.
Fig. 6
Use <OK> to call the menu. Select the national language using the <↑↓> arrow keys, confirm it with
<ENTER>/<OK>: