SI Analytics TITRONIC 300 - Manual Controller; External PC Keyboard (Optional)

67
3.3 Manual controller
The manual controller (Fig. 18) is needed for manual titration. It can also be used for starting dosage or other
methods.
Fig. 18
Mode
Black key
Grey Key
Manual titration
Start of titration, single-step and
continuous titration (please refer to
chapter 3.6.1, manual titration)
Filling
Stop of titration including evaluation
Dosage through Dosage method
Start dosage
Filling
3.4 External PC Keyboard (Optional)
Keys
Function
<ESC>
<ESC> will take the user to the previous level on the
menu.
<F1>/<START>
Start of a selected method
<F2>/<STOP>
Stop of the current method
<F3>/<EDIT>
Change of the current method, new method, copy method,
standard methods
<F4>/<FILL>
Fill the interchangeable unit
<F5>/
Display and modification of the balance data
<F6>/<MODE>
Selection of method, rinsing, system settings, balance
data
<F7>/<SYS>
System settings (language selection, time/date ...)
<F8/<CAL>
No function on the TITRONIC® 300
<F9>/+ / -
Change of sign
<F10>/<DOS>
Call dosing menu
Num/ Scroll and Lock/ Lock
Without function
Prt Sc and Sys Rq
Without function
<ESC>
Selection of the method-selection menu from the main
menu.
Elders: <ESC> will take you back to the previous level in
the menu.
< > <  > <←> <→>
Selection of individual menus and numeric values
0...9
Input of numeric values
<ENTER>
Confirmation of input parameters
< Backspace >
Deletion of one input digit / an input character to the left of
the blinking cursor
Letters,
ASCII-symbols
Alphanumeric input possible. Uppercase and lowercase
possible.
All other keys
Do not have any function