SI Analytics TITRONIC 300 - Main Menu; Manual Titration

70
3.6 Main Menu
After power-up, the main menu is always the first menu to appear. The method displayed will always be the last
method that was used (Fig. 24). In the present case it was a titration method.
Fig. 24
3.6.1 Manual Titration
Manual titration is always performed using the manual controller. Manual titration is impossible without the
manual controller.
Fig. 25
Using <START> pressing the Black key on the manual controller will start the manual titration method.
Depending on the settings of the method, the system will prompt you for the sample description (Fig. 26) and the
sample weight (Fig. 27). You can use an external PC keyboard (optional) to enter a 20-digit alphanumeric sample
ID.
Fig. 26