3.5 Menu Structure
There are 4 selection menus:
Start or main menu
Method parameters
Method selection
System settings
After power-up, the main menu is always the first menu to appear. The method displayed will always be the last
method that was used (Fig. 19).
Fig. 19
Pressing <START> will result in the immediate execution of the method shown. <EDIT>/F3 will take you to the
method parameters (Fig. 20.
Fig. 20
At this point you can
modify the current method
create a new method
call and memorise standard methods
copy or delete an existing method
print a method (titration methods only)
Use the <↓> und <↑> keys to select the submenus, confirm your selection with <OK>/<ENTER>. <ESC> will take
you back to the main menu.
To Next Page
Loading...
