<MODE>/F6 will take you to the method selection menu (Fig. 21).
Fig. 21
Existing methods can be selected by pressing the <↓> und <↑> keys and confirming the selection with
<OK>/<ENTER>. Once the selection made, you will return to the main menu with the newly selected method.
If no method is selected, <ESC> will also take you back to the main menu.
To navigate directly to the system settings (Fig. 22 and Fig. 23) you can use the <SYS>/F7 key; you can also
navigate there through the method selection menu.
Fig. 22
Fig. 23
To Next Page
Loading...
