Fig. 33
Fig. 34
The dosed volume will be briefly displayed before the display returns to the main menu.
The next dosage operation can be started immediately. Filling of the unit following dosage will not occur
automatically, unless the maximum cylinder volume has been reached or the automatic filling option (“always")
was activated. The unit can be filled at any time using <FILL>.
A dosing operation can also be performed without any dosing method with the <DOS>/<F10> key of the external
keyboard:
Fig. 35
This is the point to input the volume which will be dosed following the confirmation with <OK>/<ENTER.
To Next Page
Loading...
