Laser class
Figure 1: Laser output aperture of the different designs
The device complies with laser class 2. The entire reading window is a laser output
aperture.
NOTE
No maintenance is required to ensure compliance with Laser Class 2.
Warning symbol on the device
The colored laser warning label is fitted in combination with the type label on the rear of
the device.
In addition to other information, the type label of the device in use also contains the
laser output data. This consists of: Laser output power (maximum/average), wave‐
length or wavelength range, and pulse time duration. The data is located on the lower
section of the type label, see "Type label", page 13.
2 SAFETY INFORMATION
10
O P E R A T I N G I N S T R U C T I O N S | CLV63x, CLV64x, CLV65x 8019588/129Z/2019-02-07 | SICK
Subject to change without notice