1
Data Matrix code
2
Helper line for alignment
3
Grayscale (testing of print quality of the customer print)
4
Center point of the mulitcode label
5
Distance between code and center point (testing of the dimensions of the customer print)
6
Number of the label (letters and numbers can be adjusted for the customer)
It is recommended to use the SICK multicode label as it is optimally tailored to the
application. The SICK multicode label also enables the highest overspeeds to be
reached. Alternatively, individual 2D codes provided by the customer can also be used.
The 2D codes must be dependent on the working distance and the mounting direction
of certain requirements on code resolution, see "Typical reference values during opera‐
tion", page 56.
PRODUCT DESCRIPTION
3
8024289/19E9/2020-10-21 | SICK O P E R A T I N G I N S T R U C T I O N S | GLS621
21
Subject to change without notice
To Next Page
Loading...
