Chapter 3 Operating Instructions
ICR890 High-end CCD Camera System
30 © SICK AG · Division Auto Ident · Germany · All rights reserved 8011325/0000/2006-10-24
Product description
1-D/2-D code detection
• Data Matrix ECC200 (PDF417 in preparation)/all conventional bar codes
• Max. number of 1-D codes: 50 per reading pulse
• Max. number of 2-D codes: 10 per reading pulse
• Separation of identical codes of the same code type using the code position
• Output sorting: Code position, FIFO, LIFO, code lengths list
• Manipulation of output strings via filter or format masks
Data communication
• Main data interface HOST: Configurable output format of the reading result,
communication redirectable to Ethernet interface
• AUX auxiliary data interface: Permanent output format with special diagnosis functions,
communication redirectable to Ethernet interface
• Two 1 GBit Ethernet interfaces for fast image output
Reading pulse
• External reading pulse via switching input(s) or data interface
Electrical interfaces
• HOST data interface: RS 232, RS 422/485 serial, Ethernet or CAN (various transfer
rate and protocol configurations possible)
• AUX data interface: RS 232, RS 422/485 serial, Ethernet or CAN (permanent transfer
rate, data format and protocol)
• CAN interface for integration into SICK CAN-SENSOR Network with the MSC800 or into
a CAN Open Network
• Ethernet interface (10/100 MBps), TCP/IP and FTP
• Two 1 GBit Ethernet interfaces, FTP and GigE Vision Standard
• Two digital switching inputs for external reading pulse sensor and incremental encoder
via optocoupler
• Two digital switching outputs for signalling definable results in the reading process
(system status)
• Connection to PROFIBUS-DP via MSC800
Connection technology (design)
• Data and function interfaces: M12 connector for industrial use
• GBit Ethernet: Phoenix VARIOSUB RJ-45 sockets, enclosure rating IP 67
• Power supply: Harting connectors
To Next Page
