SICK ICR890

Chapter 5 Operating Instructions
ICR890 High-end CCD Camera System
74 © SICK AG · Division Auto Ident · Germany · All rights reserved 8011325/0000/2006-10-24
Electrical installation
“POWER IN“ connection (power supply IN)
“POWER OUT“ connection (power supply OUT for illumination)
Pin Signal Function
1 +24 V DC (ICD890) Power supply IN
2 GND (ICI890_1) Ground
3 +24 V DC (ICI890_1) Power supply IN
4– n. c.
5– n. c.
6 GND (ICD890) Ground
7 +24 V DC (ICI890_2) Power supply IN
8 GND (ICI890_2) Ground
PE Protective ground
Tab. 5-27: ICD890 Camera: Pin assignment of the 8-pole Harting HanQ8 plug “POWER IN“
Pin Signal Function
1– n.c.
2 GND (ICI890_1) Ground
3 +24 V DC (ICI890_1) Power supply OUT
4– n.c.
5– n.c.
6– n.c.
7 +24 V DC (ICI890_2) Power supply OUT
8 GND (ICI890_2) Ground
PE Protective ground
Tab. 5-28: ICD890 Camera: Pin assignment of the 8-pole Harting HanQ8 socket “POWER OUT“
8
3
6
1
6
1
8
3