SICK ICR890

Chapter 5 Operating Instructions
ICR890 High-end CCD Camera System
54 © SICK AG · Division Auto Ident · Germany · All rights reserved 8011325/0000/2006-10-24
Electrical installation
5.2 Electrical installation preparation
The ICR890 System can be used for single-side reading with or without the MSC800 or for
multi-side reading with the MSC800.
These three possibilities of use are described in the following chapters, each one by means
of a block diagram and a table of connections. Instructions on how to carry out the individual
installation sequences are contained in Chapter 5.4, page 64 .
5.2.1 Electrical installation of the ICR890 System (without MSC800)
Block diagram of the ICR890 System without MSC800 for single-side reading from above
Abb. 5-1: Block diagram: connection principle of the ICR890 (standard system)
ICR890 System
IN 2
OUT (1/2)
HOST ETHERNET
PC/laptop
Configuration/
diagnosis
(temporary)
Reading result
GBIT 1/2 ETHERNET
Real-time
presentation of images
Special PC
MLG
Light Grid
HOST
Reading pulse
Increment
Detection
object height
24 V DC
AUX/
HOST ETHERNET
IN 1
ILLUMINATION
POWER OUT
Host processor
Photoelectric
reflex switch
Incremental encoder
POWER IN
HOST