More examples can be found on the installation CD, in the folder hmi_web_example inside
the documentation folder. A Custom Web Toolkit can be found on the support pages (vis-
ionsupport.sick.com) which provides a framework that simplifies the process of making an
HMI as well as additional templates and examples..
3.5 Handle the Web API
The Web Server and Web API interfaces can be activated or deactivated. When activated, it
is possible to select port number and to allow command channel changes. The same settings
apply both to the Web Server and to the Web API. The Web interfaces are configured in the
Interfaces and I/O settings dialog in the InspectorPIM60 menu.
The Web API is based on standard HTTP request and responses. Recommended request
timeout time is 3 seconds to allow for images to be transferred properly.
21
©SICK AG • Advanced Industrial Sensors • www.sick.com • All rights reserved
Subject to change without notice
8015726/2013-11
Interfaces
Web interface
Reference Manual
Inspector PIM
To Next Page
Loading...
Need help?
General
