SICK PGT-08-S User Manual

PROGRAMMING TOOL | SICK 8016223/19SR/2020-11-02
Subject to change without notice
4
PGT PGT-08-S@SOPA S
1 About this document
Read these operating instructions carefully before you commission the PGT-08-S hard-
ware and use the SOPAS software.
1.1 Purpose of this document
These operating instructions provide a description of the commissioning and use of pro-
gramming tool PGT-08-S hardware and the installation and use of the SOPAS software
for programming encoders.
1.2 Target audience
Theseoperatinginstructionsareintendedforstawithtechnicaltrainingwhocarryout
programming of programmable encoders from SICK Stegmann GmbH. They assume
an appropriate level of knowledge for the use of software and electrical engineering in
general.
1.3 Information depth
These operating instructions contain information about the PGT-08-S@SOPAS on the
following topics:
− Product description
− Commissioning and programming
Technical knowledge is also required which is not provided in this document.
Additional information on the PGT-08-S@SOPAS can be found online at
www.sick.com.
1.4 Symbols used
Icon Meaning
The symbol indicates a hazardous point where the product can be dam-
aged by improper handling.
This symbol refers to a hazardous point due to electrical charge which
can damage the product.
Thissymbolprexesanotecontainingimportantadditionalinforma-
tion.
1.5 Associated documents
Follow the current assembly instructions and note the current product information for
the device you wish to program before starting the task.

SICK PGT-08-S Specifications

General

Brand	SICK
Model	PGT-08-S
Category	Media Converter
Language	English