5.5 Dismantling the UE410-SD
Figure 8: Detaching the plug-in terminals
1. Remove the pluggable terminals along with the wiring and the end pieces.
Figure 9: Removing the devices from the DIN mounting rail
2.
Pr
ess the device down at the rear (1) and remove it from the DIN mounting rail
(2) in the direction of the arrow while keeping it pressed down.
5 MOUN
TING
20
O P E R A T I N G I N S T R U C T I O N S | UE410 Safeguard Detector Box 8021417/2018-01-17 | SICK
Subject to change without notice
To Next Page
Loading...
