SICK UE410-SD

1 About this document
1.1 Purpose of this document
These operating instructions contain the information required during the life cycle of the
S
afeguard Detector sensors and UE410-SD safety evaluation module. This document
describes:
•
The system components
•
The project planning
•
The mounting and electrical installation
•
The configuration
•
The necessary thorough checks
•
The commissioning
•
The maintenance
•
The troubleshooting
•
The dismantling and disposal
1.2 Scope
These operating instructions are included with SICK part number 8021415 (all avail‐
able lan
guages of this document).
NOTICE
T
hese operating instructions must be made available to all those who work with the
UE410-SD and the Safeguard Detector sensors.
Please read the operating instructions carefully and make sure that you understand the
content fully before working with the UE410-SD and the Safeguard Detector sensors.
1.3 Target groups and structure of these operating instructions
These operating instructions are intended for the following target groups: project devel‐
oper
s (planners, developers, designers), installers, electricians, operators, and mainte‐
nance personnel.
These operating instructions are organized by the life phases of the safety system:
project planning, mounting, electrical installation, commissioning, operation and main‐
tenance.
1.4 Further information
www.sick.com
T
he following information is available via the Internet:
■
Other language versions of these operating instructions
■
Downloadable example applications
■
Guide for Safe Machinery (“Six steps to a safe machine”)
■
Type examination by TÜV Süd
1.5 Symbols and document conventions
The following symbols and conventions are used in this document:
ABOUT THIS DOCUMENT 1
8021417/2018-01-17 | SICK O P E R A T I N G I N S T R U C T I O N S | UE410 Safeguard Detector Box
5
Subject to change without notice