Operating Instructions Chapter 2
V200/V300
8012227/YT87/2016-03-29 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 11
Subject to change without notice
On safety
2.5 Environmental protection
The V200/V300 safety camera system has been designed to minimise environmental
impact. It uses only a minimum of power and natural resources.
⋅ At work, always act in an environmentally responsible manner.
2.5.1 Disposal
⋅ Always dispose of unserviceable or irreparable devices in compliance with local/
national rules and regulations with respect to waste disposal (e.g. European waste
code 16 02 14).
We would be pleased to be of assistance to you on the disposal of these devices.
Contact us.
2.5.2 Separation of materials
Only qualified safety personnel are allowed to separate materials!
Caution is required when dismantling devices. There is a risk of injuries.
Before you send the devices for appropriate recycling, it is necessary to separate the
different materials in the V200/V300.
⋅ Separate the housing from the rest of the parts (in particular the circuit board).
⋅ Send the separated parts for recycling as appropriate:
Components Disposal
Product
Housing Metal recycling (aluminium)
Circuit boards, cable, connector and
electrical connecting pieces
Electronic recycling
Packaging
Cardboard, paper Paper/cardboard recycling
Polyethylene packaging Plastic recycling
Note
a
WARNING
by components
To Next Page
Loading...
Need help?
General
