SICK V200 - 12 Ordering Information; Safety Camera Systems

Chapter 12 Operating Instructions
V200/V300
58 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8012227/YT87/2016-03-29
Subject to change without notice
Ordering information
12 Ordering information
12.1 Safety camera systems
In addition to the safety camera system, you will require one of the resolution sets.
Description Part number
Safety camera systems
consisting of camera, teach-in pin, label “Important Information”,
operating instructions on CD-ROM and Quick-Start (instructions for
quick commissioning), multi-lingual
V200 Work Station Extended (Cat. 2 according to EN ISO 13 849-1) 1042027
V300 Work Station Extended (Cat. 3, PL d according to
EN ISO 13 849-1)
1041542
Resolution sets
consisting of test rod (to suit the resolution) and 2 reflector strips
Resolution set for 20 mm resolution 2051336
Resolution set for 24 mm resolution 2051338
Resolution set for 30 mm resolution 2051339
Ordering example
A V300 is to be used in your application with a resolution of 20 mm.
Then you must order the following:
• V300 Work Station Extended (Cat. 3, PL d according to
EN ISO 13 849-1)
1041542
• Resolution set for 20 mm resolution 2051336
Note
Tab.
16
:
Part numbers
safety camera systems