SICK V200 User Manual

Operating Instructions Chapter 1
V200/V300
8012227/YT87/2016-03-29 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 5
Subject to change without notice
About this document
1 About this document
Please read this chapter carefully before working with the documentation and the V200
Work Station Extended or V300 Work Station Extended safety camera system, referred to
in the following as V200/V300 for short.
1.1 Function of this document
These operating instructions are designed to address the technical personnel of the
machine manufacturer or the machine operator in regards to safe mounting, installation,
configuration, electrical installation, commissioning, operation and maintenance of the
V200/V300 safety camera system.
These operating instructions do not provide instructions for operating machines on which
the safety camera system is, or will be, integrated. Information on this is to be found in the
operating instructions for the machine.
1.2 Target group
These operating instructions are addressed to planning engineers, machine designers and
operators of plants and systems which are to be protected by one or several V200/V300
safety camera systems. It also addresses people who integrate the V200/V300 into a
machine, initialise its use, or who are in charge of servicing and maintaining the device.
1.3 Information depth
These operating instructions contain the following information on the V200/V300 safety
camera system:
• mounting
• electrical installation
• commissioning
• care and maintenance
• fault diagnosis and troubleshooting
• part numbers
• conformity and approval
Planning and using protective devices such as the V200/V300 also require specific
technical skills which are not detailed in this documentation.
When operating the V200/V300, the national, local and statutory rules and regulations
must be observed.
General information on accident prevention using opto-electronic protective devices can
be found in the competence brochure “Guidelines Safe Machinery”.
Please refer also to the SICK homepage on the Internet at www.sick.com.
Here you will find information on:
• application examples and application reports that supplement the application examples
in chapter 6
• a list of frequently asked questions regarding the V200/V300
• these operating instructions in different languages for viewing and printing
• certificates on the prototype test, the EU declaration of conformity and other documents
Note

SICK V200 Specifications

General

Brand	SICK
Model	V200
Category	Digital Camera
Language	English