Need help?Do you have a question about the SICK WI130 and is the answer not in the manual?
General| Brand | SICK |
|---|---|
| Model | WI130 |
| Category | Motherboard |
| Language | English |
Provides links to product pages and available documentation.
Explains warning symbols, notes, and instruction indicators used in the manual.
Essential safety guidelines for installation, operation, and environmental protection.
Defines the product's intended application and operational limitations.
Lists prohibited uses and potential hazards associated with misuse of the device.
Describes the basic operational purpose of the WI130 evaluation unit.
Details the buttons, LEDs, and their functions on the evaluation unit.
Explains how to lock and unlock the device's control buttons for error prevention.
Instructions for attaching and detaching the evaluation unit from its mounting rail.
Step-by-step guide for connecting sensor heads to the evaluation unit.
Crucial safety notes and requirements for performing electrical installations.
Details UL approval requirements for power supply and environmental protection ratings.
Information regarding connector pin assignments and wire color coding conventions.
Steps to set the maximum sensitivity using Single Value Teach-in.
Detailed procedure for configuring the device using the Single Value Teach-in method.
Procedure for configuring the device using the Two Value Teach-in method.
Instructions for performing an automatic configuration process.
Procedure for configuring the device using the Zone Teach-in method.
Method for teaching in transparent objects using specific detection techniques.
Configuration for Lnth mode to determine object size and width.
Adjusting threshold values using the UP/DOWN switches on the device.
Overview of how to configure various operational functions of the device.
Steps to select and configure the device's operating mode (ON/OFF switching).
Procedure to select and set the device's operational response time.
Options for setting time delay functions like OFF-Delay and ON-Delay.
Process for scaling and enabling/disabling the sensitivity range.
Accessing and performing advanced configuration settings.
Steps to initialize or reset all device settings to default.
Finalizing the configuration process and exiting settings.
Procedure to set the main display value to zero for calibration.
Selecting different presentation methods for the device display.
Configuring detection methods for setting switching thresholds.
Configuring the device's counting function (up, down, or deactivated).
Setting the output method for 1x Out or 2x Out.
Assigning specific functions to the external input of the device.
Changing and configuring settings related to the analog output.
Copying device settings to other connected WI130 devices.
Zeroing display values across all bus-connected WI130 devices.
Performing the Single Value Teach-in for all connected devices.
Setting standard values for the length measurement function.
Exiting the detailed configuration menu and returning to previous settings.
Accessing and configuring various settings within the analog output menu.
Turning the analog output functionality on or off.
Setting the operational range for the analog output signal (e.g., 4-20 mA).
Specifying how the device handles invalid or unavailable measurement values.
Configuring the moving average for measurement repeats to smooth readings.
Setting the status for the device's extreme value memory function.
Exiting the analog function configuration menus.
Method to return to normal operating mode using a single button press.
Procedure for changing the operating channel of the evaluation unit.
Explanation of error codes and patterns during the teach-in process.
Instructions for cleaning the sensor's optical interfaces and housing.
Overview of the key technical specifications for the WI130T evaluation unit.
Technical drawings illustrating the product's physical dimensions and features.
Information on obtaining conformity documents and product certificates.
To Next Page
